EasyManuals Logo

Launch X-431TOP User Manual

Default Icon
41 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #38 background imageLoading...
Page #38 background image
LAUNCH X-431TOP Users Manual
33
X-431TOP Technical
parameter
Usage Parameter
Working ambient temperature0℃~50
Transporting storage temperature-10℃~70
Working ambient relevant humidity 20%
90%(40)
Transporting storage relevant humidity20%
90%(40)
Pressure: 86kpa106kpa
Oscilloscope Technical
Parameter
X-431TOP Technic parameter
Oscillograph technic parameter
Collection:
1.time resolution range: 2.5μs,5.0μs,10.0μ
s,25.0μs,50.0μs,100μs,250μs,500μ
s,1.0ms,2.5ms,5.0ms,10.0ms,25.0ms,50.0ms,10
0ms,250ms,500ms,1.0s,2.5s,5.0s,10.0s.
2. signal mode: DC/ AC
Channels:
1.Coupling mode: DC,AC.
2.Measuring range: 5.0mv/div10.0mv/div
20.0mv/div50.0mv/div100.0mv/div
200.0mv/div500.0mv/div1.0v/div2.0v/div
5.0v/div10.0v/div20.0v/div.
Trigger:
1.Trigger channel: one of the CH1,CH2, CH3 and
CH4.
2.Default trigger channel: CH1.
3.Default trigger level: 0mv.
4.Default level range: 6X(the measuring range of
trigger channel).
Measuring :
1. Voltage Differential between cursor: (the
measuring range of the channel)/ 50.
2. Time differential between cursor: (the time
resolution range of any channels)/50.
Precision:
1. Time resolution: 2.5μs;
2. Voltage resolution: 5mv;
3. Time precision: ±5%.
4. Voltage precision: ±5%.
Engine Analysis Parameter
1. Engine speed: measuring range
500-7200r/min.
2. Real VCY_ICCANG (Platinum Close Angle (%):
measuring range 0-90°( cam bearer).
Precision:
1.Engine speed: indication error is less than 1%.
2.Real VCY_ICCANG (Platinum Close Angle
(%):indication error is less than
±1( cam bearer).
Sensor Test Technical
Parameter
Sensor test
Voltage test:
1.Measuring range: DC -400+400V
2.Input impedance: 10M.
Voltage test:
Measuring range: 01 M0hm
Frequency test:
1.Measuring range: 115kHz
2..Input impedance: 300kOhm
3.Input range: 112V
Precision:
Check precision: ±1%
Sensor simulate function:
DC voltage signal:
1.Output range: -12V+12V
2.The maximal output current: 40mA
Squarl-wave signal:
1. Impulse frequency: 0.115kHz
2. Range: -12V+12V
3. Duty ratio: 10%90%
Sensor standard signal:
1. Frequency range: 0.1100Hz
2. Range: -12V+12V
Hand-draw waveform Signal:
1. Frequency range: 0.1100Hz
2. Range: -12V+12V
Simulation precision rate:

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Launch X-431TOP and is the answer not in the manual?

Launch X-431TOP Specifications

General IconGeneral
BrandLaunch
ModelX-431TOP
CategoryTest Equipment
LanguageEnglish

Related product manuals