44
10. Replace the lid.
Close the Reported Issue by entering new pump serial number in the LDAR Support Portal. This will activate
the warranty on the pump. Failure to do this will void the warranty.
Are the sample and combustion pumps interchangeable?
)8#;.*"#.6&-@.*$.-8#;.8*3#.(/55#"#6-.-91/62?.N--#0+-/62.-&."#0&3#.*6(.#<48*62#.-91/62.7/''.
(*0*2#.-8#.+90+?.
To tell them apart, remember that the sample pump has two pieces of Teflon tubing attached
whereas the combustion only has one piece of Teflon tubing attached.!
What is the warranty on the pump and battery?
Please check the warranty document that you can download at
http://www.ldartools.com/#support in the Resources section.
Will we have to service the diaphragms on the pumps?
No. The pumps are designed to be plug and play. You cannot service the diaphragms.