Power and Environmental Requirements
PHOTON
+
System Guide 11
3. Use a layer of shock absorbing material 3 to 4 inches (70 to 100 mm)
thick around all sides of the system to provide firm cushioning and
prevent movement inside of the container. Protect the control panel
with cardboard.
Caution
Styrene pellets in any shape should never be used as packing
material. The pellets do not adequately cushion or prevent the
system from shifting in the carton. The pellets also create static
electricity that can damage electronic components.
4. Seal the shipping container securely.
5. Mark the shipping container FRAGILE to ensure careful handling.
6. In any correspondence, refer to the system by model name and serial
number.
To Next Page
Loading...
Need help?
General
