LDS Dactron PHOTON+ User Manual

System Installation
PHOTON
+
System Guide 19
Windows XP
To uninstall the PHOTON
+
device driver in Windows XP follow
these instructions.
a. Go to the Windows Start button and select Control Panel,
and then double click System from the list of control panels.
Click on the Hardware tab and then the Device Manager
button.
b. Scroll down to Universal Serial Bus controllers, click the “+”
icon to expand the selection and right click on “LDS-Dactron
Photon USB device”. Select Uninstall from the pop up
menu.
The
PHOTON
+ +
will only be listed if it is connected via the
USB cable. If the PHOTON
+
is not connected, then it will
not be listed in the Device Manager list.

LDS Dactron PHOTON+ Specifications

General

Brand	LDS
Model	Dactron PHOTON+
Category	Measuring Instruments
Language	English