Leadshine Technology CS-D1008E User Manual

CS-D1008E Closed Loop Stepper Drive User Manual
Page | 17
Appendix A. Leadshine CS-D1008E Compatible Stepper Motors
The following Leadshine stepper motors with 1000-line encoders have been tested working with the CS-D1008E
closed loop stepper drive.
Model
Frame Size
(NEMA)
Torque
(N.m / Oz-In)
Series
Length
(mm / inch)
Notes
CS-M23435
34
3.5 / 495
CS-M
95 / 3.74
-
CS-M23435-S
3.5 / 495
95 / 3.74
0.50-inch (12.7-mm) shaft
CS-M23445
4.5 / 637
109 / 4.29
-
CS-M23445-S
4.5 / 637
109 / 4.29
0.50-inch (12.7-mm) shaft
CS-M23445B
4.5 / 637
144 / 5.67
24VDC brake integrated
CS-M23445WP
4.5 / 637
115 / 4.53
IP65 rated
CS-M23480
8.0 / 1132
127 / 4.96
-
CS-M23480-S
8.0 / 1132
127 / 4.96
0.50-inch (12.7-mm) shaft
CS-M23485
8.5 / 1202
147 / 5.79
-
CS-M23485-S
8.5 / 1202
147 / 5.79
0.50-inch (12.7-mm) shaft
CS-M23485B
8.5 / 1202
182 / 7.17
24VDC brake integrated
CS-M23485WP
8.5 / 1202
154 / 6.06
IP65 rated
CS-M234120
12.0 / 1698
158 / 6.22
-
CS-M234120B
12.0 / 1698
193/ 7.60
24VDC brake integrated
CS-M234120WP
12.0 / 1698
164 / 6.46
IP65 rated
Note: all above stepper motors are mounted with 1000-line incremental encoders, also can contact Leadshine for
stepper motors with 2500-line, 5000-line encoders.

Leadshine Technology CS-D1008E Specifications

General

Brand	Leadshine Technology
Model	CS-D1008E
Category	Control Unit
Language	English