10 Trouble Shooting
Your XTP8886 is reliable and easy to use. If you encounter any problem
while using this product, please refer to the table below for possible solutions.
Plug power adapter in the power outlet in the wall.
Plug the power cord in the unit.
Power Indicator OFF
Make sure the power indicator is ON.
If auxiliary video input is used on TV, select the appropriate video
input for TV.
No image is displayed on LCD screen
Make sure the power cord is connected.
Be sure the RJ-45 wire is plugged into the "NETWORK" jack directly
on the XTP8886.
The unit is not responding when any button is pressed
Plug RJ-45 cable from wall socket into "NETWORK" jack on the unit.
Can not dial an IP address
Increase light on the image and reduce back lighting.
Video of local view is dark
Hang up and call again.
Ask the other party to call you.
Video connection is not established correctly
56
To Next Page
Loading...