USER’S MANUAL
OBDII Auto Scanner
26
4.3 BMW Diagnostics
CAUTION: Don't connect or disconnect any test equipment with ignition on
or engine running.
1). Turn the ignition off.
2). Locate the vehicle's 16-pins Data Link Connector(DLC).
3). Plug Into the scan tool cable connector to the vehicle's DLC.
4). Turn the ignition on. But do not start the engine.
5). Press the ENTER button. The Main Menu will be observed on the
Display.
6). Use the UP/DOWN buttons to select LandRover from the menu and
press the ENTER button.
Main Menu
OBDII DIAGNOSE
BMW
DTC LOOKUP
REVIEW HISTORY
TOOL SETUP
HELP
7). Use the UP/DOWN buttons to select the Sub-Brand and press the
ENTER button.
con.
BMW
Quick Test
Clear DTC
Reset
To Next Page
Loading...