USER’S MANUAL
OBDII Auto Scanner
27
Quick Test
CAUTION:Quick test for all systems in the car via system by stem
scanning.
Select Quick Test and press the Enter button.
If there are no Diagnostic Trouble Codes present, the display will indicate
NO CODES ARE STORED IN THE MODULE!
If there are any Diagnostic Trouble Codes present, the DTC number and
its definition will show On the LCD display.
The subcode, the communication protocol, the sequence of The DTC
current-ly being observed and the total number of codes detected will be
observed on the upper right hand Corner of the display.
When a DTC's definition covers more than one display screen, use the
Enter button, as necessary,to view any additional information.
If the DTC definition is not available, an advisory message prompting
you to refer to the vehicle service manual will be observed on the display.
If more than one DTC is found,use the UP/DOWN scroll buttons, as
neces-sary,until all the codes have been shown up.
16627 --100 01/10
CAN BUS
======================
Solenoid Valve(A)
For Boost Pressure
Control(N75) :
Malfunction: P0243
con.
BMW
Quick Test
Clear DTC
Reset
To Next Page
Loading...