25
5. Troubleshooting / 5.2 Wi-Fi Connection
Before Wi-Fi setup, make sure Robot, Mobile Phone, and Wi-Fi network meet the following requirements.
Robot and Mobile Phone Requirements
•The power switch of Robot is turned on.
•Robot is ready for network setup.
Wi-Fi Network Requirement
•You are using a 2.4-GHz or 2.4/5-GHz mixed network.
•Your router supports 802.11b/g/n and IPv4 protocol.
•Do not use a VPN (Virtual Private Network) or Proxy Server.
•Do not use a hidden network.
•WRA and WPA2 using TKIR PSK, AES/CCMP encryption.
•WEP EAP (Enterprise Authentication Protocol) is not supported.
•Use Wi-Fi channels 1-11 in North America and channels 1-13 outside North America (refer to local regulatoryagency).
•If you are using a network extender/repeater, the network name (SSID) and password are the same as your primary
network.
To Next Page
Loading...
