Lefon R4 - Technical Specification

________________________________________________________________________________________________
_______________________________________________________________________________________________
Operation Manual Page 6 of 27
Technical Specification
Power 1600 W
Protection Double insulated
Speed 150 – 270 RPM (R2 to R12)
40 – 70 RPM (RH)
Drive Motor 1 phase AC motor
200-240 V, 50/60 Hz
100-120 V, 50/60 Hz
Cutting Range Specified in the following table
Model
R4 R6 R8 R12
½”-4”
3”-6” 6”-8” 8”-12” Pipe OD
19-120 mm
85-182 mm 150-230 mm 215-325 mm
0.04”-0.22” 0.08”-0.4” 0.08”-0.4” 0.08”-0.4” Wall thickness
1-7 mm 2-10 mm 2-10 mm 2-10 mm
Motor 1600 w 1600w 1600w 1600w
Blade RPM 150-250 150-250 150-250 150-250
Voltage/
Frequency
110/220 V
50/60 Hz
110/220 V
50/60 Hz
110/220 V
50/60 Hz
110/220 V
50/60 Hz
75 kg 90 kg 110 kg 130 kg Net Weight
165 lb 198 lb 242 lb 286 lb
Application • Thin-wall stainless-steel tubes
• Stainless steel pips
• Low and unalloyed steel
• Casting materials, non-ferrous metal
• Copper, aluminum and plastic pipes