LEGRAND FSIR-100 - HBP-111 High Bay Sensor Overview; HBP-111 Sensor Description

HBP111
The HBP High Bay Passive Infrared (PIR) Occupancy Sensor consists of two components. These components were developed
to work as a convenient system and include both sensor and lens modules. HBP-111 sensor is designed for automatic lighting
control in warehouses and other indoor high bay spaces. The lens is specifically engineered to provide reliable coverage
from a wide range of mounting heights. Time Delay and Light Level settings for the HBP sensor can be adjusted via trimpots
designated for each. The HBP-111 can also be commisioned remotely using a wireless configuration tool.
The HBP occupancy sensor is designed to mount directly to a light fixture and control the load in the fixture. It can be wired to
control all ballasts in the fixture. When motion is detected within the sensor’s coverage area, the relay in the sensor closes, and
lighting loads are automatically turned on. When motion is no longer detected for the duration of the time delay setting, the
relay opens and the lighting load is turned off. The sensor’s light level hold-off and time delay settings are factory preset at 300
foot candles and 15 minutes, respectively, which are suitable for most high bay applications.
COMPONENTS
PIR Sensor
(do not touch)
Light Level
Adjustment
Trimpot
Time Delay
Adjustment
Trimpot
Detection
Indicator LED
IR
Receiver
IR
Transmitter
Push Button
Visit our web site for FAQs: www.wattstopper.com