LEGRAND Keor T Series - Page 23

19
KEOR T
Operating Manual
There are 7 dierent alarms dened.
By default one alarm is assigned to each relay; however
this can be changed by the user. It is also possible to
assign the same alarm to each of the 4 relays.
You may set each relay via this menu.
When you touch the save icon key, a conrmation
pop-up bar will appear.
You should touch Yes to save the settings.
Touch No to exit without saving the changes.
UPS records the event logs with the date and time
information. Thus, the events can be followed
chronologically.
When you touch the save icon key, a conrmation
pop-up bar will appear. You should touch Ye s to save
the settings. Touch No to exit without saving the
changes.
UPS records the event logs with the date and time
information. Thus, the events can be followed
chronologically.
When you touch the save icon key, a conrmation
pop-up bar will appear. You should touch Ye s to save
the settings. Touch No to exit without saving the
changes.
Set the date and time of UPS during pre-setting.