LEGRAND Keor T Series User Manual

43
KEOR T
Operating Manual
Appendix-2: Diagnostics List
No Diagnostics Description
1 Bypass active UPS is on Bypass operation.
2 Bypass blocked Bypass is blocked by UPS
3 Bypass disabled Bypass is disabled by user
4 Eco mode active Eco mode is selected
5 Battery test active Battery test is running now
6 Battery discharging Rectier overload and cannot feed DC enough or mains failure
7 Ambient temperature high Ambient temperature exceeds the upper limit
8 Rectier passive Rectier is not running now
9 Rectier blocked Rectier is blocked by UPS
10 Rectier disabled Rectier is disabled by user
11 Inverter passive Inverter is not running now
12 Inverter blocked Inverter is blocked by UPS
13 Inverter disabled Inverter is disabled by user
14 Generator mode active Generator friendly operation is activated
15 ESD active Emergency Switching Device interface is activated
16 Maintenance bypass active Maintenance bypass switch is at “ON” position
17 Output breaker open Output circuit breaker is at “OFF” position

LEGRAND Keor T Series Specifications

General

Brand	LEGRAND
Model	Keor T Series
Category	UPS
Language	English