LEGRAND neat PIR II - Page 18

18 PIR II User manual - NE41 19003-00 v1.2
13.2.2 Static
In Static PIR II sends an alarm (Tx) aer the rst
movement detection (M) and will ignore new move-
ment detections (M) during 60 seconds before a new
alarm (Tx) is sent.
60 sTx
M
Picture 12. Movement detection (M) and transmission (Tx) in
Static Mode.
13.3 DIP3 - IDA function
Set to ON to activate IDA (Intelligent Door Alarm).
• If DIP3 is set to ON, DIP2 and DIP5 are ignored.
• If DIP3 is set to OFF, DIP4 is ignored.
• DIP3 aects the behaviour of DIP8.
13.4 DIP4 - IDA, exit alarm delay
In IDA, this setting determines the delay for an
exit alarm. When set to ON (Long) the exit alarm is
delayed for 180 seconds aer a movement detection
while OFF (Short) delays the exit alarm 5 seconds.
• DIP4 is ignored if DIP3 is set to OFF.