45
10. Technical Data
Stand
• Stable and torsion-free cast-iron stand with
motorized height adjustment for the carrier of
the comparison bridge (stroke 255 mm), mo-
torized stages and motorized focusing
•Motorized synchronous displacement of the
stages and focusing unit over the entire travel
path
• Built-in power supply for all motorized func-
tions
Focusing
•Two motorized focusing drives
• Focusing speed matched to the current mag-
nification
• Stroke: 25 mm
Stages
•Motorized cross-stages
• Stage surface: 160 mm x 220 mm
• Glass stage plates: 80 mm x 80 mm
• Travel range: 50 mm x 50 mm
• Ergonomic operating knobs for cross and
synchronized displacement
• Optional: remote control with “Smart Move”
control panel
• Travel speed matched to the current magnifi-
cation
• Bore hole receptacles for the adjustable hold-
er, the rotating stages, the large sample stag-
es or the bullet holder
10. Technical Data
Stackable rotating stages ø 118 mm
• Openings ø 50 mm
• Removable glass stage plates
• Clamping device for the stage rotation
• Stage carrier with receptacle for rotating
polarizer
Inclining stages ø 75 mm
• Can be locked into place
• Inclines in all directions up to 45°
• Surface with ridged surface
Large sample stages
• Stage surface: 210 mm x 300 mm
•Metal plates for thin objects such as docu-
ments
• Can be stacked on the cross-stage
Motorized comparison bridge with integrated
ergonomic tube
• For superimposed image or split image com-
parisons with variable dividing line
• Variable width of dividing line
• Combination of split image and superimposed
image possible
• Color variation of deviation in traces possible
in superimposed image observations
•Magnification calibration of right beam path
possible (+/- 4%)
• Receptacles for macro-objectives 0.4x, 1x, 2x, 4x
with adjustable iris diaphragms
• Rotating fasteners for the holders for oblique
incident illumination
• Slots for inserting filter slides
• Distance between the optical axes: 400 mm
To Next Page
