Leica M Series User Manual Assembly 41
Leica IsoPro Manual Mechanical Stage: Assembly (Continued)
1. Take the glass plate from the mechanical
stage and turn it around.
2. Change the gear rod from the left to the
right-hand side.
Control assembly
1. Take the glass plate from the mechanical
stage and turn it around.
2. Attach the axis with the control buttons to
the desired side. The fastener snaps into the
mechanical stage magnetically.
4. Attach the axis with the two supplied hexa-
gon-head screws.
5. Attach the cover rail to the mechanical
stage.
Mechanical stage assembly
1. Place the mechanical stage onto the base.
2. Pull the upper part of the mechanical stage
carefully towards the user, fixing the lower
part onto the transmitted-light base.
To Next Page
