Leica M Series User Manual Assembly 47
The new Leica M series features extensive
encoding with which various microscope data
and settings can be read out, transferred to the
PC and reproduced later.
O The interface to the optics carrier is on the
column.
The terminals The connection to the PC and to other instru-
ments is made using the terminals on the rear
side of the column:
1. 3 CTL2 terminals for auxiliary equipment
such as the ring illuminator, the base and
other accessories from the Leica product
range.
2. Terminal for the power supply provided.
3. USB terminal for the connection to the PC.
Cables: Connections
1
2
3
1
To Next Page
