Leisure UNITY 2018 - Awning; Extending the Awning

48
MOTORHOME OPERATION UNITY MOTORHOME
7� Remove foil
9
covering the access panel on the
right side�
9
8� Remove the access panel
10
by removing the
staples rst.
10
9� Remove the mounting screw
11
�
11
10� Then locate the mounting screw on the right side
of the slide out and remove the screw.
If you have unplugged the motor electrical
connectors (
5
&
6
) from the control
module
4
, do NOT move the motorhome
unless the slide out room and the slide
out room motors electrical connectors
(
5
&
6
) are reconnected to the control
module
4
. Reconnecting the motor electrical
connectors to the control module applies a
brake to the slide out room motors, keeping
the slide out room locked in position.
CAUTION
4� Unplug the microwave cord
7
in the cabinet
adjacent to microwave.
7
5� Remove the six screws
8
holding the microwave
in place�
8
8
8
8
8
8
6� Remove the microwave.