5.4101.8538.0 B
Preface 7
Preface
Manual Contents
This manual contains the information for the correct installation, setup and maintenance of the Luna
Rotary Cow Brush. The information in this manual is for operators and technicians:
• The operator uses the information to clean the machine or to replace the brush.
• The technician uses the information to install and set up the machine.
Study and understand this information thoroughly before you install or do
maintenance on the machine. Failure to do so could result in damage to equipment
or personal injury (see on page 2-1). Please consult your local Lely service provider if
you do not understand the information in this manual, or if you need additional
information. Store this manual in a safe place for future reference.
All information in this manual has been compiled with care. Lely shall not be liable for errors or faults in
this manual. The recommendations are meant to serve as guidelines. All instructions, pictures and
specifications in this manual are based on the latest information that was available at the time of
publication. Your machine may comprise improvements, features or options that are not covered in this
manual.
Applicabilty
The table below shows the machine type numbers for which this manual is applicable.
Model
Type number
Luna Rotary Cow Brush 230V.
5.4101.0061.1
Luna Rotary Cow Brush 115V.
5.4101.0071.1
Standard Torque Loading of Parts
All the nuts, bolts and screws used on the machine are torque tightened to standard torque loadings
applicable to the construction materials used.
If a part has a non-standard torque loading, it is specified in the applicable part of the manual.
Registration
The type and serial number plate of the machine is attached to the side of the machine. Always include
the type and serial number of your machine when you contact your local Lely service provider or when you
order spare parts.
in n o vato rs in ag ric u lt u re
To Next Page
Loading...
