Note: Applying labels to the base cover
The new base cover FRU is shipped with a kit containing labels of several
kinds. When you replace the base cover, you need to apply the following
labels:
a Windows license label (COA)
b Product label
c FCC or homologation label
d MAC address label
For
some models, you also need to apply one or two FCC labels c. Check
the old base cover; if it has one or two FCC labels, find duplicates of them in
the label kit and apply them to the new base cover.
Apply the labels to the base cover as shown in this figure.
b
a
c d
Removing and replacing a FRU
ThinkPad Z60t 85
To Next Page
Loading...
Need help?
General