1010 Battery pack
DANGER
Unlock the battery release lever 1. Holding the battery release lever in the
unlocked position 2, remove the battery pack in the direction shown by arrow
3.
1 2
3
When installing: Install the battery pack along the slide rails of the slot. Then
make sure that the battery release lever is locked, as in this
figure.
2
1
Use only the battery specified in the parts list for your computer. Any other battery
could ignite or explode.
Removing and replacing a FRU
56 MT 8747, 8749, 9440, 9441, 9442, 9443, and 9448
Downloaded from LpManual.com Manuals
To Next Page
Loading...
Need help?
General