Figure19.Removingthebezeloftheopticaldrivecage
8.Touchthestatic-protectivepackagethatcontainsthenewopticaldrivetoanyunpaintedmetalsurface
ontheserver.Then,removetheopticaldrivefromthepackageandplaceitonastatic-protective
surface.
9.Followtheinstructionsthatcomewiththeopticaldrivetosetjumpersorswitches,ifthereareany.
10.Payattentiontotheupanddownpositionoftheopticaldriveandslidetheopticaldriveintoplace.
Figure20.Slidingtheopticaldriveintothedrivecage
11.Installthetworetainingscrewstosecuretheopticaldriveinthecage.
48ThinkServerRD240HardwareMaintenanceManual
To Next Page
Loading...
