Lenovo ThinkServer RD240 - Installing, Removing, or Replacing Hardware Devices; Removing or Installing the System Board Battery

5.RemovethescrewthatsecuresthePCIcard.ThengraspthePCIcardbyitsedgesandgentlyslidethe
PCIcardoutoftherisercardassembly.
Figure30.RemovingthePCIcard
Note:TheillustrationonlyshowshowtoremovethePCIcardfromthePCIcardslot2.Ifyouare
removingthePCIcardfromthePCIcardslot3,theprocedureissimilar.
6.IfyouareinstructedtoreturnthePCIcard,followallpackaginginstructionsanduseanypackaging
materialsthataresuppliedtoyouforshipping.
Whattodonext:
•Toworkwithanotherpieceofhardware,gototheappropriatesection.
•Tocompletetheremovalprocedure,goto“Completingthepartsreplacement”onpage90.
Installing,removing,orreplacinghardwaredevices
Thissectionprovidesinstructionsonhowtoinstall,remove,orreplacehardwaredevicesforyourserver.
Youcanmaintainyourserverbyreplacingthefailinghardwaredevices.Ifyouarereplacingahardware
device,performtheremovalprocedureandthenperformtheinstallationprocedureforthehardwaredevice
thatyouwanttoreplace.
Removingorinstallingthesystemboardbattery
Thissectionprovidesinstructionsonhowtoremoveorinstallthesystemboardbattery.
Removingthesystemboardbattery
Attention:Donotopenyourserverorattemptanyrepairbeforereadingandunderstandingthe“Safetyinformation”
onpageiiiand“Guidelines”onpage35.
Thissectionprovidesinstructionsonhowtoremovethesystemboardbattery.
Toremovethesystemboardbattery,dothefollowing:
1.Removeallmediafromthedrivesandturnoffallattacheddevicesandtheserver.Then,disconnectall
powercordsfromelectricaloutletsanddisconnectallcablesthatareconnectedtotheserver.
2.Removetheservercover.SeeRemovingtheservercover.
3.Locatethebatteryonthesystemboard.SeeLocatingpartsonthesystemboard.
4.Removethesystemboardbattery.
Chapter7.Installing,removing,orreplacinghardware57