Lenovo ThinkServer RD240 - Removing or Installing the Riser Card Assembly

Figure25.Installingtheharddiskdrivetrayassembly
4.ChecktheharddiskdrivestatusLEDstomakesurethattheharddiskdriveisoperatingcorrectly.You
mighthavetorestarttheserverforthedrivetoberecognized.IftheamberharddiskdrivestatusLED
foradriveislitcontinuously,itindicatesthatthedriveisfaultyandmustbereplaced;ifthegreenhard
diskdriveactivityLEDisashing,thisindicatesthatthedriveisbeingaccessed.
Note:IftheserverisconguredforRAIDoperationusingaRAIDcontroller,youmighthaveto
recongurethediskarraysafteryoureplaceharddiskdrives.
5.Tocompletetheinstallation,gotoCompletingthepartsreplacement.
Removingorinstallingtherisercardassembly
Thissectionprovidesinstructionsonhowtoremoveorinstalltherisercardassembly.
Removingtherisercardassembly
Attention:Donotopenyourserverorattemptanyrepairbeforereadingandunderstandingthe“Safetyinformation”
onpageiiiand“Guidelines”onpage35.
ThissectionprovidesinstructionsonhowtoremovetherisercardassemblywithPCIcard(s)installed.
Toremovetherisercardassembly,dothefollowing:
Note:Useanydocumentationthatcomeswiththerisercardandfollowthoseinstructionsinadditionto
theinstructionsinthissection.
1.Removeallmediafromthedrivesandturnoffallattacheddevicesandtheserver.Then,disconnectall
powercordsfromelectricaloutletsanddisconnectallcablesthatareconnectedtotheserver.
2.Removetheservercover.SeeRemovingtheservercover.
3.DisconnectanycablesfromthePCIcardoranycablesthatimpedeaccesstotherisercard.
52ThinkServerRD240HardwareMaintenanceManual