Installing the driver for PCI and PCI Express cards
To install the driver for Peripheral Component Interconnect (PCI) and PCI Express cards, do the following:To
install the driver for Peripheral Component Interconnect (PCI) and PCI Express cards, do the following:
1. Download the driver for PCI and PCI Express cards from the Lenovo Web site to your server. If the driver
is a compressed file, extract the file first. The most up-to-date device drivers for various server models
are always available for download on the Lenovo Web site at:
http://www.lenovo.com/drivers
2. Open the driver folder and double-click the Setup file. The Welcome the ...Setup Wizard window is
displayed.
3. Click Next. The License Agreement window is displayed.
4. Select I accept agreement and click Next. The Select Destination Location window is displayed.
5. Click Next. The Ready to Install window is displayed.
6. Click Install. The Completing the ...Setup Wizard window is displayed.
7. Select the default settings and click Finish. The Choose Setup Language window is displayed.
8. Select your desired language and click Next. The Welcome to the ...Controller window is displayed.
9. Click Next. The “Ready to Install the Program” window is displayed.
10. Click Install. The “InstallShield Wizard Complete” window is displayed.
11. Click Finish to restart your server.
Installing the driver for Intel Management Engine Interface
To install the driver for Intel Management Engine Interface, do the following:
1. Download the driver for Intel Management Engine Interface from the Lenovo Web site to your server. If
the driver is a compressed file, unzip it to a folder. The most up-to-date device drivers for various server
models are always available for download on the Lenovo Web site at:
http://www.lenovo.com/drivers
2. Copy the folder that contains the driver to your USB storage device and connect the USB storage device
to your server.
3. Open the folder that contains the driver and double-click the Setup file. The “Inter(R) Management
Engine Components Welcome” window is displayed.
4. Click Next. The License Agreement window is displayed.
5. Select I accept the terms in the license agreement and click Next. The Destination Folder window is
displayed.
6. Choose your desired destination folder and click Next. The InstallShield Wizard Complete window is
displayed.
7. Click Finish.
Installing the driver for the PMC 8885e card
To install the driver for the PMC 8885e card on a Windows operating system, do the following:
1. Download the corresponding driver from the Lenovo Web site. If the driver is a compressed file, unzip it
to a folder. The most up-to-date device drivers for various server models are always available for
download on the Lenovo Web site at:
http://www.lenovo.com/drivers
2. Copy the folder that contains the driver to your USB storage device and connect the USB storage device
to your server.
60
ThinkServer RS140 Operating System Installation Guide
To Next Page
Loading...
