Lenovo ThinkSystem HR330A - CentOS Installation Procedures

125
Aptio Setup Utility - Copyright (C) 2017 American Megatrends, Inc.
Main Advanced Security Boot Save & Exit Server Mgmt
Save as
Restore
User
User
Defaults
Defaults
*|-------------------------|
*|><: Select Screen
*|^v: Select Item
2. Installing CentOS
2.1 Installing CentOS via Installation Media
2.1.1 Preparing CentOS Installation Media
1. Prepare one USB storage device (8GB) and one SATA drive.
2. On a Linux machine, download the latest CentOS ISO file and dd to a USB storage device (>= 8GB)
2.1.2 Installing CentOS
1. Plug the USB device and SATA disk into the board.
2. Boot the system to the bootloader menu (Aptio Setup Utility) by pressing “Esc” during system boot-up.
2.1.2.1 Instructions for Aptio Setup Utility
3. In the Aptio Setup Utility screen, select the Save & Exit tab then select UEFI: Built-in EFI Shell entry, as highlighted below.
|
|
|
Discard Changes and Exit Save
Changes and Reset Discard Changes
and Reset
^|
*|
*|
|
|
|
|
*|
|
|
Save Options
*|
|
|
Save Changes
*|
|
|
Discard Changes
*|
|
|
*|
|
|
Restore Defaults
*|
|
|
Boot Override
*|Enter: Select
|
|
CentOS (P1: HGST HUS726020ALE610)
*|+/-: Change Opt.
|
| UEFI: PXE boot on MAC: xx:xx:xx:xx:xx:xx *|F1: General Help |
| UEFI: PXE boot on MAC: xx:xx:xx:xx:xx:xx +|F2: Previous Values |
| UEFI: PXE boot on MAC: xx:xx:xx:xx:xx:xx +|F3: Optimized Defaults |
|
UEFI:
UFD 3.0 Silicon-Power8G PMAP
+|F4: Save & Exit
|
|
UEFI:
Built-in EFI Shell
|ESC: Exit
|
$ wget http://mirror.centos.org/altarch/7/isos/aarch64/CentOS-7-aarch64-Everything-1804.iso
$ dd if= CentOS-7-aarch64-Everything-1804.iso of=/dev/sdX
$ sync