Lenovo ThinkSystem HR330A - Set or Un-Set the UEFI Manufacturing Mode (Deprecated)

143
2.3 Set or un-set the UEFI manufacturing mode (Deprecated)
The command is used to set the UEFI to run on manufacturing mode on next boot.
Linux command:
$ ipmitool raw 0x3c 0x2 0x4 0xff
Description:
NetFn
0x3c
Command
0x2
Request data:
Mask
0x4 – Use bit 2 to control the feature, the effect depends on the value.
Value
[7:0]
0x0 - Trigger to disable the feature that running at manufacturing mode 0xff - Trigger to enable the
feature that running at manufacturing mode
Response data:
Byte
Data field
1
Completion Code