Lenovo ThinkSystem HR330A - Enable;Disable Auto-Recovery Support; Get Auto-Recovery Support Status

161
2.30 Enable/Disable Auto-recovery Support
This command is to enable/disable auto-recovery support.
Linux command:
$ ipmitool raw 0x3c 0x26
Description:
NetFn
0x3c
Command
0x26
Request Data:
Byte
Data field
1
1: Enable
0: Disable
2
Component ID
2: BIOS Component
5: SCP Component
Response Data:
Byte
Data field
1
Completion Code
2
Current Enable/Disable Status 1: Enabled
0: Disabled
2.31 Get Auto-recovery Support Status
This command is to get auto-recovery support status.
Linux command:
$ ipmitool raw 0x3c 0x27
Description:
NetFn
0x3c
Command
0x27
Request Data:
Byte
Data field