This group of pages allows you to do the following. The menu contains the following items:
• Firmware Update
• Protocol Configuration
• Dual Image Configuration
Maintenance BMC configuration and firmware.
• Preserve Configuration
• Restore Configuration
• System Administrator
• Backup and Restore Configuration
Terminate the current Web Console session.
Note: If the remote console (KVM) window is active, it will close automatically when you are logging
out. After logout, the Web console will back to logon screen.
There also are tabs on the top of the home page:
Table 3. Tabs on the top of the ThinkSystem Remote Management Module home page
Display the messages received
Display the notification received
On/Off to Sync with latest sensor and eventlog updates
Display the current log-in user name
4.3.4 Log-out
To log out the ThinkSystem Remote Management Module and turn back to the log on page, click “Sign out” on the left down of the
toolbar.
Note: Automatic Timeout: If the Web console detects no user activity within five minutes, the current session will be automatically
terminated. If the user has opened the KVM remote console window, then the Web session will not automatically timeout. When the
automatic timeout happens, the system will inform the user to log on again if the user wants to access the Web console to take
operations.
To Next Page
Loading...
