Lenovo ThinkSystem HR330A - Save & Exit; Save Options; Default Options

77
3.8 Save & Exit
Use the arrow keys to select Save & Exit on top of the screen. The Save and Exit screen looks like below.
3.8.1 Save Options
 Save Changes and Exit: Set this option to exit system setup after saving the changes.
 Discard Changes and Exit: Select this option to quit the BIOS Setup without making any permanent changes to the system
configuration.
 Save Changes and Reset: Select this option to reset the system after saving the changes
 Save Changes: Select this option to save the changes from users and allow users to continue to make changes.
 Discard Changes: Select this option to revert the changes from users.
 Discard Changes and Reset: Select this option to reset the system without making any permanent changes to the system
configuration.
NOTE: The BIOS is reset when you select “Save Changes and Exit” option when users changes below BIOS setting:
 L3 Cache Enable
 Memory Operating Speed Selection.
3.8.2 Default Options
 Restore Defaults: Select this option to restore the factory settings which is designed for maximum system stability, but not for
maximum performance.
 Save as User Defaults: Select this option to enable the user to save any changes to the BIOS setup for future use.
 Restore User Defaults: Select this option to retrieve user-defined settings that were saved previously.