Lenovo ThinkSystem HR330A - Get MUX Configuration; Restore Default Configuration

146
Response data:
Byte
Data field
1
Completion Code
2
Direction:
00 – MUX to SYS
01 – MUX to BMC
02 – MUX to SOL
0
2.7 Get MUX Configuration
The command is used to get the MUX configuration for the specify port.
Linux command:
$ ipmitool raw 0x3c 0xe0 <Port Index>
Description:
NetFn
0x3c
Command
0xe0
Request data:
Byte
Data filed
1
Port Index:
0x0 – UART 0
0x1 – UART 1
0x2 – UART 4
Response data:
Byte
Data field
1
Completion Code
2
Direction:
00 – MUX to SYS
01 – MUX to BMC
02 – MUX to SOL
0
2.8 Restore default Configuration
This is the AMI command that support to restore the default configurations values.
Linux command:
$ ipmitool raw 0x32 0x66