88
Add User
Add a user to the BMC user list. To add a user, you need to fill out the following information:
User Name: press Enter to fill in the user name you would like to create.
User Password: press Enter to fill in the user password (and confirm the password).
Channel No: Set the LAN channel that the user can access the BMC on if the system has more than 1 LAN port. Otherwise, set
to 0.
User Privilege Limit: Choose the privilege level of this user for the selected channel. The options are: ‘Reserved’, ‘Callback’,
‘User’, ‘Operator’, ‘Administrator’, ‘OEM Proprietary’, and ‘No Access’.
To Next Page
Loading...
