Figure 6. Connectors and components on the KVM cable
Table 10. Connectors and components on the KVM cable
1 Serial connector 4 Video connector (blue)
2 Captive screws 5 USB 2.0 ports (2)
3 to KVM connector
Parts list
Use the parts list to identify each of the components that are available for your compute node.
For more information about ordering the parts shown in Figure 7 “Compute node components” on page 18:
https://datacentersupport.lenovo.com/products/servers/thinksystem/sn550/7x16/parts
Note: Depending on the model, your compute node might look slightly different from the illustration.
Chapter 2. Compute node components 17
To Next Page
Loading...
