4. Carefully lay the compute node on a flat, static-protective surface, orienting the compute node with the
bezel pointing toward you.
5. Remove the compute node cover (see “Remove the compute node cover” on page 42).
6. Remove the air baffle (see “Remove the air baffle” on page 31).
7. Locate the processor that is to be removed.
Figure 50. DIMM and processor location
Table 14. DIMM and processor location
1 DIMM connectors 13–18 4 Processor socket 1
2 Processor socket 2 5 DIMM connectors 7–12
3 DIMM connectors 1–6 6 DIMM connectors 19–24
Complete the following steps to remove a PHM.
Watch the procedure. A video of the installation process is available:
• Youtube: https://www.youtube.com/playlist?list=PLYV5R7hVcs-B4_LYuT9X1MRWBU6UzX9gO
• Youku: http://list.youku.com/albumlist/show/id_50481482
Step 1. Remove the PHM from the system board
Chapter 3. Hardware replacement procedures 67
To Next Page
Loading...
