• On-Target update. The installation or update is initiated from an Operating System executing on the
server’s operating system.
• Off-Target update. The installation or update is initiated from a computing device interacting directly with
the server’s Lenovo XClarity Controller.
• UpdateXpress System Packs (UXSPs). UXSPs are bundled updates designed and tested to provide the
interdependent level of functionality, performance, and compatibility. UXSPs are server machine-type
specific and are built (with firmware and device driver updates) to support specific Windows Server, Red
Hat Enterprise Linux (RHEL) and SUSE Linux Enterprise Server (SLES) operating system distributions.
Machine-type-specific firmware-only UXSPs are also available.
See the following table to determine the best Lenovo tool to use for installing and setting up the firmware:
Tool
In-band
update
Out-of-
band
update
On-
target
update
Off-
target
update
Graphical
user
interface
Command-
line interface
Supports
UXSPs
Lenovo XClarity
Provisioning
Manager
Limited to core system
firmware only.
√ √ √ √
Lenovo XClarity
Controller
Supports core system
firmware and most
advanced I/O option
firmware updates
√ √ √ √
Lenovo XClarity
Essentials OneCLI
Supports all core
system firmware, I/O
firmware, and installed
operating system
driver updates
√ √ √ √
Lenovo XClarity
Essentials
UpdateXpress
Supports all core
system firmware, I/O
firmware, and installed
operating system
driver updates
√ √ √ √
Lenovo XClarity
Administrator
Supports core system
firmware and I/O
firmware updates
√ √ √ √
The latest firmware can be found at the following site:
Chapter 1. Introduction 5