Step 3. Grasp the adapter by upper corners, and pull it from the system board.
Figure 89. Adapter removal from the system board
Remove an adapter from the PCIe riser-card assembly
To remove an adapter from a PCIe riser-card assembly removed from the server, complete the following
steps:
Step 1. Open the bracket on the PCIe riser-card assembly.
Step 2. Grasp the adapter by upper corners, and pull it from thePCIe riser-card assembly.
Figure 90. Adapter removal from the PCIe riser-card assembly
If you are instructed to return the component or optional device, follow all packaging instructions, and use
any packaging materials for shipping that are supplied to you.
Install an adapter
Use this procedure to install an adapter.
Before installing an adapter:
Chapter 3. Hardware replacement procedures 91
To Next Page
Loading...
