Lenovo ThinkSystem ST550 - Install the RAID Super Capacitor Module

To install the air baffle, complete the following steps:
Watch the procedure. A video of the installation process is available:
• Youtube:
https://www.youtube.com/playlist?list=PLYV5R7hVcs-Acsjj4tU79GzKnWG316BYn
• Youku: http://list.youku.com/albumlist/show/id_50483452
Figure 63. Air baffle installation
Step 1. Carefully insert the rear end of the air baffle into the chassis.
Step 2. Press the front end of the air baffle downward until it snaps into place.
After installing the air baffle, connect the RAID super capacitor module to a RAID adapter with the extension
cable that comes with the RAID super capacitor module.
Install the RAID super capacitor module
Use this information to install the RAID super capacitor module.
“Read the
installation
Guidelines” on
page 58
“Power off
the server for
this task” on
page 109
“ATTENTION:
Static Sensitive Device
Ground package before opening”
on page 59
To install a RAID super capacitor module, complete the following steps:
Watch the procedure. A video of the installation process is available:
• Youtube:
https://www.youtube.com/playlist?list=PLYV5R7hVcs-Acsjj4tU79GzKnWG316BYn
• Youku: http://list.youku.com/albumlist/show/id_50483452
Chapter 3. Server hardware setup 101