Lenovo ThinkSystem ST650 V2 - Remove a Hot-Swap Fan

• Depending on the specific type, your full-length GPU adapter might look different from the illustration in
this topic.
• Use any documentation that comes with the full-length GPU adapter and follow those instructions in
addition to the instructions in this topic.
Watch the procedure. A video of the installation and removal process is available:
• YouTube:
https://youtube.com/playlist?list=PLYV5R7hVcs-DoEcxrm2zKNpaKOdZ3f8Qc
• Youku: https://list.youku.com/albumlist/show/id_59636516
Procedure
Step 1. Locate the full-length GPU adapter you want to remove.
Step 2. Remove the full-length GPU adapter.
Figure 47. Full-length GPU adapter removal
a. Open the PCIe adapter retainer.
b.
Grasp the full-length GPU adapter by its edges and carefully pull it out of the PCIe slot.
c.
Disconnect the power cable from the full-length GPU adapter.
Remove a hot-swap fan
Use this procedure to remove a hot-swap fan.
About this task
S017
CAUTION:
Hazardous moving fan blades nearby. Keep fingers and other body parts away.
Chapter 4. Server hardware setup 93