Figure 87. NVLink bridge installation
Install a GPU filler
Use this information to install a GPU filler.
About this task
S033
CAUTION:
Hazardous energy present. Voltages with hazardous energy might cause heating when shorted with
metal, which might result in spattered metal, burns, or both.
S017
CAUTION:
Hazardous moving fan blades nearby. Keep fingers and other body parts away.
Attention:
• Read “Installation guidelines” on page 58 to ensure that you work safely.
• Prevent exposure to static electricity, which might lead to system halt and loss of data, by keeping static-
sensitive components in their static-protective packages until installation, and handling these devices with
an electrostatic-discharge wrist strap or other grounding system.
Note: If you have installed one double-wide GPU adapter in PCIe slot 1, or three double-wide GPU adapters
in PCIe slot 1, 3, and 7; install a GPU filler for proper cooling and airflow.
Watch the procedure. A video of the installation and removal process is available:
Chapter 4. Server hardware setup 133
To Next Page
Loading...
