2. DIMM configurations that support Software Guard Extensions (SGX), see “Enable Software Guard
Extensions (SGX)” on page 157 to enable this feature.
Independent memory mode with two processors and same capacity memory modules
Table 21. Independent mode with two processors and same capacity memory modules (processor 1)
Total
DIMMs
Processor 1
Total
DIMMs
1 2 3 4
5 6 7 8 9 10 11 12 13 14 15 16
2 14 2
4 10 14 4
8
1
3 7 10 14 8
1
12 1 3 7 10 14 16 12
16
1,2
1 3 5 7 10 12 14 16 16
1,2
24 1 2 3 4 7 8 9 10 13 14 15 16 24
32
1,2
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 32
1,2
Table 22. Independent mode with two processors and same capacity memory modules (processor 2)
Total
DIMMs
Processor 2
Total
DIMMs
17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32
2 19 2
4 19 23 4
8
1
19 23 26 30 8
1
12 17 19 23 26 30 32 12
16
1,2
17 19 21 23 26 28 30 32 16
1,2
24 17 18 19 20 23 24 25 26 29 30 31 32 24
32
1,2
17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 32
1,2
Notes:
1. DIMM configurations that support Sub NUMA Clustering (SNC), which can be enabled via UEFI.
2. DIMM configurations that support Software Guard Extensions (SGX), see “Enable Software Guard
Extensions (SGX)” on page 157 to enable this feature.
Independent memory mode with two processors and different capacity memory modules
Table 23. Independent mode with two processors and different capacity memory modules (processor 1)
Total
DIMMs
Processor 1
Total
DIMMs
1 2 3 4
5 6 7 8 9 10 11 12 13 14 15 16
4 12 14 4
8 3 5 12 14 8
16
1,2
1 3 5 7 10 12 14 16 16
1,2
24
1,2
1 3 4 5 7 8 9 10 12 13 14 16 24
1,2
32
1,2
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 32
1,2
Chapter 4. Server hardware setup 65
To Next Page
Loading...
