Table 38. One processor fan configuration (continued)
Fan configuration Description
Four dual rotor fans in fan slot 1, 2, 3, and 4.
1.  Supports one CPU with TDP less than 250W.
2.  Supports PMEM.
3.  GPU adapters are not supported.
4.  Supports up to thirty-two 2.5-inch SAS/SATA drives.
5.  Supports up to sixteen 3.5-inch SAS/SATA/NVMe 
drives.
6.  Supports fan redundancy.
Four dual rotor fans in fan slot 1, 2, 3, and 4.
1.  All CPU SKUs are supported.
2.  Supports PMEM.
3.  Supports GPU adapters.
•  Supports up to three single-wide GPUs.
•  Supports up to two double-wide GPUs.
4.  Supports up to sixteen 2.5-inch SAS/SATA drives.
5.  Supports up to eight 3.5-inch SAS/SATA/NVMe 
drives.
6.  Supports fan redundancy.
Chapter 4. Server hardware setup 79