Lenz Digital plus SET-01/4 User Manual

Information SET-01 39
DIGITAL plus
Begin assembling the MU:
Press On the display you see Explanation
Call up the first of the locomotives
that you want to include in a MU.
Display shows the most
recently selected menu
You see the prompt for entering
the multi-unit consist address
Key in the number of the MU. This
number can only have two digits.
If you make a mistake, then you
can clear the last digit with the ‘Cl’
key and make corrections.
The direction arrow now blinks. At
this point you decide which
direction the locomotive will enter
relative to the consist direction.
Pressing the '<>' key will change
the blinking arrow to point down.
This means that the locomotive will
enter the consist in the reverse
direction. Moving the consist
forward will cause the locomotive
to move backwards.
Pressing the '<>' key again causes
the blinking direction arrow to now
point up or forwards. The
locomotive will now enter the
consist moving in the same
direction as the consist.
The “E” in the display now changes
to a small “m” to show you that this
locomotive is in a MU

Lenz Digital plus SET-01/4 Specifications

General

Brand	Lenz
Model	Digital plus SET-01/4
Category	Control Unit
Language	English