Information SET-01 5
DIGITAL plus
2 Contents
1 Important information — Please read first! 3
1.1 Method for describing commands within this manual: 4
2 Contents 5
3 Quick Start Users Guide 7
3.1 Connection and initial operation 7
3.2 Operating Your first Train 9
4 System design overview of DIGITAL plus 12
4.1 Command Station LZ100 13
4.2 Installing the Command Station 13
5 Overview of the functions of LH100 15
5.1 Controlling locomotives 15
5.2 The function menu of LH100 16
6 The LH100 LCD Display 19
7 Controlling locomotives with the LH100 20
7.1 Changing locomotive speed and direction 20
7.2 Entering a new locomotive address on the LH100 keypad 20
7.3 Quickly toggling between 2 locomotive addresses 21
7.4 Selecting an address from the command station stack 22
7.5 Taking over control of a locomotive from another hand held
controller 24
7.6 Activating locomotive functions 24
7.7 Showing and changing throttle-notches 26
8 Emergency stop and emergency off 28
8.1 Turning off the track power 28
8.2 Changing operating information during emergency stop/off 29
8.3 Switching turnouts during emergency stop 30
9 Configuring locomotive decoder functions 30
10 Double header 32
10.1 Prerequisites for creating a double header 33
10.2 Configuring two locomotives as a double header: 33
10.3 Combining locomotives with different speed step numbers into a
double header 35
10.4 Error messages when assembling a double header 35
10.5 Disassembling a double header 36
11 Multi-unit consists (MU) 37
11.1 What is a multi-unit consist? 37
11.2 Prerequisites for a multi-unit consist: 38
11.3 Assembling a multi-unit consist (MU) 38
11.4 Controlling a multi-unit consist 40
11.5 Displaying the members of a MU and switching between
locomotives in a MU 40
11.6 Removing a locomotive from a MU consist 41
To Next Page
Loading...
