70
Code 1eve 1
* C380 Set-value 1
(process dahin)
8100_Ä Technical description
PRG
Parameter level
Factory
I
Customer
settings settings
<===>
-16384...+16384
Set-value 1 scaled to fcinax
(1)
......--------------.---------------.--.-----------------
Only for LECOMinterface
* C381 TotaL set-value
(Process datln)
1-_____--------------------_______________________________
--------------------------------------------------------.
-16384.. .+16384
TotaL set-value scaled to fcinax
(1)
Only for LECOMinterface; read only is possible.
Write format: COOO...4000 Hex (4 digits, only absol.)
value or -1,634...+1,634 decimal
* C382 Speed controller
aetual value
(process datll11)
1_______._________________________________________________
-16384.. .+16384 (1)
Actual value of speedcontroller scaled to fdnax
In open-loop control, 0 i s output.
---------------------------------------------------------
Only for lECOM interface; read only is possible.
1--------------------------_______________________________
* = extended code set
Then..mer of 214 corresponds to 100X fa.ax
SH + PRG to contirm the set parameters reter to the optional operating unit 810288
(see 5 and 61
{xxx} = Resolution
Lenze
To Next Page
Loading...
