Lenze c550 - Page 11

NOTICE
High input voltage at the device.
Destrucon of the device.
▶
Observe maximum permissible input voltage.
▶
Fuse device at the input against too high input voltage.
NOTICE
Short circuit at the device due to electrostac discharge.
Destrucon of the device.
▶
The personnel must be free of electrostac charge prior to working on the device.
NOTICE
Free spaces on the backplane bus.
Malfuncon on the backplane bus due to free spaces between the modules.
▶
Connect the modules directly in succession.
NOTICE
Short circuit in the device due to incorrect handling.
Destrucon of the device.
▶
Only plug in and remove the controller and modules of the I/O system 1000 when the
supply voltage is switched o.
Safety instrucons
Residual hazards
11