Lenze c550 - Log in to the Controller (Load Configuration)

5.11 Log in to the controller (load conguraon)
How to use the »PLC-Designer« to log into the controller:
Precondions
•
A connecon between the controller and the »PLC-Designer« has been established.
1. Use the Online Login menu command or <Alt>+<F8> to log into the controller.
Logging in serves to load the device parameterizaon and the PLC program into the controller.
Any exisng conguraon or PLC program is overwrien.
Commissioning
Log in to the controller (load conguraon)
21