Lenze · Inverter Drive 8400 motec (PROFINET® option) · DMS 5.0 EN · 02/2019 · TD23 43
8 Process data transfer
8.2 Port interconnection of process data objects (PDO)
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
For some process data words, you can also assign signals to the individual bits via the
and buttons.
Select the signals and then confirm the selection with OK.
The current interconnection is only displayed if the following has been set for the control
mode in code C00007 = 40: Network (MCI/CAN).
To Next Page
Loading...
