Lenze E84DGFCRFNP - Page 67

Lenze · Inverter Drive 8400 motec (PROFINET® option) · DMS 5.0 EN · 02/2019 · TD23 67
11 Diagnostics
11.1 LED status displays
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
BE
(bus error)
red On
Bus error/fault is active (e.g. PROFINET cable not connected). The
Communication Unit is in the "No_Data_Exchange" status.
blinking
Impermissible settings:
• Invalid station name
• Invalid IP parameters
The Communication Unit has been initialised and continues to work
internally with the corresponding standard values.
Flickering/
blinking
From SW version 02.00 onwards with a 50 ms blinking pattern:
From SW version 03.00 onwards with a 500 ms blinking pattern:
The "Node blinking test" PROFINET function is activated by the I/O
controller.
The jittering LED serves to identify/localise accessible I/O devices.
LED Colour Status Description
 PV
PV
PV

P
V
PV