Electrical installation
Parallel connection
Braking units with brake resistor
6
89
EDBMB935X DE/EN/FR 11.0
Z1 Brake chopper 1 = master (S3 = OFF)
Z2 Brake chopper 2 = slave (S3 = ON)
Zx Brake chopper x = slave (S3 = ON)
Z3 Mains choke
Z6 Controller
Z11, Z12, Z1x External brake resistors
K1 Mains contactor
F1 ... F3 Mains fuses
F4 ... F11 DC−bus fuses (recommendation)
Danger!
The outputs of the synchronisation interfaces have mains potential.
ƒ Only use suitable, insulated cables for wiring.
To Next Page
Loading...
