Index11
l
82
EDSMF2181IB EN 3.0
M
Manufacturer, 6
Mechanical installation, 19
Modem control commands, 70
Modem standards, 67
Modular connecting cable, 29
Modulation control commands, 75
Module device description, 57
N
Nameplate, 13
Notes, definition, 10
P
Pluggable terminal strip, Use, spring connection, 23
Pluggable terminal strips, handling, 23
Producer heartbeat time, 56
Product description, 11
Product features, 14
Protection of persons, 9
Protective insulation, 16
R
Residual hazards, 9
S
S−register, 79
Safety instructions, 8
− definition, 10
− device− and application−specific, 9
− layout, 10
Selection help for cable length / number of repeaters,
Example, 26
Signalling, 38
Signalling acc. to DR303−3, 40
Signalling of the CANopen RUN LED and ERROR LED, 65
Software version, type code, 13
Specification of the transmission cable, 24
Status LED, 12
Switch on, initial, 38
System bus (CAN), baud rate, 25, 26
System bus configurator, 33
System requirements, 32
T
TAE connecting cable, 29
Technical data, 15
Telephone connection, 29
Telephone socket, assignment, 29
Terminal data, 23
Transmission cable, specification, 24
Troubleshooting and fault elimination, 65
Type code, 13
− finding, 13
V
Validity of the documentation, 4
Voltage supply, 23
W
Warranty, 7
Wiring according to EMC, 20
To Next Page
Loading...
